Buffered, safe porcelain etching.
Sandblast (microetch) to roughen the porcelain surface.
Apply Revitalize Porcelain Etchant (Kit No. 402060) to the porcelain surface for 2-3 minutes. Then rinse and dry.
Apply Porcelain Conditioner to the porcelain surface for 30 seconds, then rinse and dry. Apply Cerinate Prime (Kit No. 1399) and gently air dry.
Mix together equal portions of Tenure A and B and apply 3-5 coats.
Apply Revitalize Resin Cement inside LUMINEERS and place LUMINEERS on the tooth surface.
Light cure for 1-2 seconds using the Ceri-Taper 2 mm or 4 mm tacking tip and the Sapphire Plasma Arc Curing Light. Remove excess Revitalize Resin Cement from the margins by using a soft brush coated with Tenure S. Using a 9 mm tip and the Sapphire PAC Light, completely cure all LUMINEERS, exposing each surface for 5 seconds.
Finishing – Adjust the occlusion and perform a routine finish on the margins.